InRouter302 LTE CAT 4 Router

InRouter302 Specifications

HARDWARE PLATFORM
CPU Platform	580MHz
RAM	128MB DDR2
Flash	32MB SPI
INTERFACE
Ethernet Port	2* 10/100Mbps fast Ethernet port, LAN/WAN port 1.5KV network isolation transformer protection Note: IR301-FQ02(- -W) has one port only
Serial Port	IR301 has 2 serial ports. 1*RS-232 and 1*RS-485 in RJ45 form. IR302 has no serial port.
Power Supply	DC9- -36V, over-current protection, anti-reverse connection, 2 PIN industrial terminal block
Reset Button	Pinhole reset button
SIM Card	Dual drawer-type SIM card slots. 2FF SIM
Wi-Fi (Optional)	IEEE 802.1 1b/g/n, 150Mbps
Antenna Connector	3G/4G: SMA x 1 Wi-Fi: RP-SMA x 1 Note: North America models (FQ38, FQ33) have 2 x SMA 4G antennas. IR302 FQ58 has only 1 SMA 4G cellular antenna
Ground Terminal	Supports
MECHANICAL SPECS
Dimensions (mm)	90X90x25mm
Weight (g)	240g
Installation Method	Panel mounting, rail mounting
Protection Rating	IP30
Housing	Metal
Cooling	Fanless
POWER RATE
Working Power	200-220mA@12V
Standby Power	240mA@12.0V
Peak Power	90mA-120mA@12V
WI-FI TRANSMIT POWER
Transmit Power	802.11b: 16dBm +/-2dBm (11Mbps) 802.11g: 16dBm +/-2dBm (54Mbps) 802.11n@2.4GHz: 16dBm +/-2dBm (HT20 MCS7) 802.11n@2.4GHz: 16dBm +/-2dBm (HT40 MCS7)
AMBIENT ENVIRONMENT
Storage Temperature	-40 ~ 85℃
Operating Temperature	-20 ~ 70℃
Ambient Humidity	5 ~ 95% (non-condensing)
INDICATOR
LED	Power, Status, Cellular, Wi-Fi, cellular Signal
EMC
Static	EN61000-4-2, level 2
Radiation Electric Field	EN61000-4-3, level 2
Pulsed Electric Field	EN61000-4-4,level 2
Surge	EN61000-4-5,level 2
Conducted Disturbance Immunity	EN61000-4-6, level 2
Shock Wave Resistance	EN61000-4-12, level 2
Power Frequency Magnetic Field Resistance	EN61000-4- -8, horizontal Ivertical 400A/m (>level 2)
PHYSICAL SPECS
Shockproof	IEC60068-2-27
Vibration Resistance	IEC60068-2-6
Free Fall	IEC60068-2-32
CERTIFICATE
CE, FCC, PTCRB, IC, Verizon, AT&T

INROUTER302 SOFTWARE SPECIFICATIONS
NETWORK CONNECTION
Network Access	APN, VPDN, PrivateNetwork
Access Authentication	CHAP/PAP
LAN Protocol	ARP
WAN Protocol	PPP, PPPoE, DHCP
Network Type	GSM/GPRS/EDGE, UMTS/HSPA+/EVDO/TD-SCDMA, TDD LTE/ FDD LTE (Please refer to the Ordering Guide for frequencies.)
NETWORK PROTOCOL
IP Application	Ping, Route Trace, DHCP Server, DHCP Relay, DHCP Client, DNS relay, DDNS, Telnet, SSH
IP Routing	Static routing, Dynamic routing
NAT	Supports network address
SECURITY
Network Security	Stateful Packet Inspection (SPI), DoS attack defense; Multicast filter/Ping probe packet, Access Control List ACL); Content URL filter, port mapping, virtual IP mapping, IP/MAC binding
Data Security	Supports PPTP, L2TP, GRE, IPSEC VPN (IKEv1, IKEv2), OpenVPN protocols Supports CA digital certificate
NETWORK CONNECTION
Reliability	VRRP hot backup
Link detection	Sends heartbeat packets to detect, auto redials when disconnected
Dual SIM Failover	Device runs self - detection, auto recovers from malfunctions
WLAN (OPTIONAL)
Protocol	IEEE 802.11b/g/n
Rate	Up to 150Mbps
Mode	AP, STA and WDS modes
Security	Open system, shared key, WPA/WPA2 certification WEP/TKIP/AES encryption
Transmission Distance	100 meters by line of sight (Actual transmission distance depends on environment of the site.)
NETWORK MANAGEMENT
QoS Management	Bandwidth limit,IP speed limit
Configuration	Telnet, web, ssh, and console
Upgrade Method	Web, Device Manager
Logs	Local system logs, remote logs, and serial export of logs. Power down saving of important logs.
SMS Functions	Status query, configuration, restart
Dial-on-demand	Dial-on-demand, data / SMS activation
Network Management	Supports InHand DeviceManager, batch management
SNMP	SNMP v1/v2c/v3҅support SNMP TRAP
Traffic Management	Supports data traffic threshold, traffic statistics and traffic alarm
Alarms	System restart alarm, LAN port online/offline alarm, data traffic alarm, SIM card failure alarm, etc.
Maintenance Tools	Ping, route tracking, network speed test
Status Query	System status, modem status, network connection status, and routing status

Download Spec Sheet

Installation Manual

Return & Refund Policy

Thanks for shopping at Bolton Technical. If you are not entirely satisfied with your purchase, we're here to help.

Anytime during your 1-year manufacturer's warranty, should your unit not perform to its usual standards, contact us, and we'll take care of it. We're not here for the one-time sale. We're here for the lifetime support.

The warranty covers material and workmanship defects on all signal booster or cellular amplifiers.

• Cell Phone Signal Booster Products  carry a 30-day money back guarantee.

Important Terms For Exchange:

1. Customer returned products should not have changed from their original state and must be unmodified. They must be returned packaged in their original packaging with proof of purchase enclosed.

2. A Handling Fee will be charged on items not returned in its original condition and packaging.

3. Amplifiers must be returned along with all accessories that were originally shipped with the amplifier for testing, repair or replacement of the entire kit.

4. If the product is deemed to have been damaged or altered, affecting its electronic or physical attributes by mishandling, neglect or misuse then the warranty won’t apply.

5. The product can be replaced or repaired as deemed fit by the manufacturer. For products returned, the buyer must pay shipping fees to the destination address. It will be shipped back after repair/replacement at no cost.
6. All products purchased on any special or promotion, can be returned within 5 days of receiving the product.

Cell phone signal boosters are valuable and high-end investments. So we understand any reasons or doubts you might have. That’s why we provide a money back guarantee. Simply contact us (011-749-3085) or email sales@boltontechnical.co.za and we’ll provide you with an RMA (return merchandise authorization). No run-arounds. No delaying tactics. Just good old fashion honest business.

We only ask that you:

• Pay for return delivery.

• Include all the original items and packaging in good condition. All weBoost/Wilson products have a 1 year warranty. Just contact us about any issue, and we’ll be glad to help.

• We do not compensate for any express delivery paid for with the original order

Returns Disclaimer : Handling Fee will be charged on items not returned in its original condition and packaging.

Cell phone signal boosters are valuable and high-end investments. So we understand any reasons or doubts you might have. That’s why we provide a 30 day return guarantee. Simply contact us (011-749-3085) or email sales@boltontechnical.co.za and we’ll provide you with an RMA (return merchandise authorization). No run-arounds. No delaying tactics. Just good old fashion honest business.

We only ask that you:

• Pay for return delivery.

• Include all the original items and packaging in good condition. All weBoost/Wilson products have a 1 year warranty. Just contact us about any issue, and we’ll be glad to help.

• We do not compensate for any express delivery paid for with the original order

Returns Disclaimer : Handling Fee will be charged on items not returned in its original condition and packaging.

Free Delivery to all Major Cities

Free Delivery on orders over R 750 applies to the following local and main centres. No hidden costs or fees.

Local 

(Johannesburg and Surrounding Areas)

Main Centre

(Johannesburg, Durban, Pretoria, Cape Town, Bloemfontein, Port Elizabeth, East London)

Regional

For Remote area delivery costs, please contact sales@boltontechnical.co.za for exact pricing.

Our preferred couriers are The Courier Guy, Courier IT, and Dawn Wing.

For all provinces, Economy Delivery takes 3-5 business days. Please contact us directly should you require express shipping.

**Express orders need to be made before 10am for same day dispatch.

We reserve the right to amend delivery costs. All changes will be disclosed here.